products

TEE

   
crosses, reducing tee
Pipe Tee, LT, Lateral tee , RT, Reducing tee, Tee fittings accord to ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.
A tee is also called triplet, three way and "T" pieces and it can be used to either combine or split a fluid flow. Most common are tees with the same inlet and outlet sizes, but 'reducing' tees are available as well. It means the one or two ends are differing in dimension. Due to this dimension differ, the makes the tee fittings with the capacity to control the volume when required.
Key Specifications/Special Features:
Size range: 1/2 to 56 inches (DN15 to DN1400)
Pressure: SCH5 to SCH160, class 3000, 6000 and 9000
Material: Carbon steel, stainless steel, malleable iron and brass,
More Tee products:
·                     Hot pressure tee
·                     Welded latered tee
·                     A335 P91 Spheroidal tee
·                     A234 WPB forged tee
·                     Spheroidal tee
·                     A335 P91 forged lateral

 

Nominal pipe size     
Outside Diameter at Bevel Center to End
D C M
DN INCH    
Series A Series B
15 1月2日 21.3 18 25
20 3月4日 26.9 25 29
25 1 33.7 32 38
32 11月4日 42.4 38 48
40 11月2日 48.3 45 57
50 2 60.3 57 64
65 2月21日 76.1(73) 76 76
80 3 88.9 89 86
90 Feb-31 101.6 95
100 4 114.3 108 105
125 5 139.7 133 124
150 6 168.3 159 143
200 8 219.1 219 178
250 10 273 273 216
300 12 323.9 325 254
350 14 355.6 377 279
400 16 406.4 426 305
450 18 457.2 478 343
500 20 508 529 381
550 22 559 419
600 24 610 630 432
650 26 660 495
700 28 711 720 521
750 30 762 559
800 32 813 820 597
850 34 864 635
900 36 914 920 673
950 38 965 711
1000 40 1016 1020 749
1050 42 1067 762 711
1100 44 1118 1120 813 762
1150 46 1168 851 800
1200 48 1220 1220 889 838

Title
Name
E-mail
Content
Code 
    Close